KSB Valves

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

KSB Pressure Seal Globe Valve KSB Pressure Seal Globe Valve to ASME B 16.34, pressure seal bonnet design, butt weld ends, tapered seat, integral stellited back seat, outside screw and yoke, head with ISO flange for actuator fitting, non-rotating stem.

Approx. Rs 500 / PeiceGet Latest Price

Product Details:

KSB Valves

We Unitek Valves an eminent distributor and trader of a wide array of KSB Valves. These products are manufactured using optimum quality raw material and latest techniques at vendor's premises. Our customers can avail these products in different specifications in the market. These products are widely demanded for their features like high tensile strength, low maintenance, durability, corrosion resistance, dimensional accuracy and perfect finish. Our comprehensive range comprises Forged Check Valves, Cast Gate Valves, Pressure Seal Check Valves, Butterfly Valves and many others.

We are instrumental in offering a comprehensive range of Cast Check Valves to the clients. Our vendors manufacture these products using optimum grade material and latest techniques. These products are available in numerous sizes, shapes and other specifications in the market. Further, these products are stringently checked on various parameters by our quality inspectors before final delivery.

 

Our range comprises the following products:

 

Cast check valve as per BS 1868

Bolted bonnet

Butt weld ends or flanged

Swing disc arrangement with inside hinge pin and non-turning disc

 

Applications:

 

Refineries

Power stations

General industry

Process engineering for water, steam, gas, oil and other non-aggressive media

 

Specifications:

 

SizeDN mm50 to 300PressureP barup to 104Temperaturetº Cup to 593

KSB CHECK / NRV VALVES KSB CHECK / NRV VALVES KSB CHECK / NRV VALVES

Approx. Rs 600 / PieceGet Latest Price

Product Details:

With an aim to stand tall on the expectations of patrons, we are engaged in offering quality assured Class 800 Globe Valve. Available in various specifications, these products are fabricated utilizing quality-approved raw material and other basic components that are sourced from the most authentic vendor present in the industry.

 

Features:

• Use of sliding stems for better operation handling
• Perfect for use in applications needing throttling & frequent operations
• High durability
• Excellent performance

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

We are instrumental in offering a comprehensive range of KSB Cast Check Valve to the clients. Our vendors manufacture these products using optimum grade material and latest techniques. These products are available in numerous sizes, shapes and other specifications in the market. Further, these products are stringently checked on various parameters by our quality inspectors before final delivery.

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

Backed by a rich vendor-base, we are able to offer a broad array of KSB Cast Globe Valve. Our vendors use superior quality raw material and technically advanced machines in the manufacturing process. These products are available in different specifications in the nationwide market.

Approx. Rs 500 / PieceGet Latest Price

Product Details:

The valve consists mainly of body (100), bonnet (162), yoke(139) as well as wedge and stem (200) and the actuating unit.Stem seal area : The gland packing (461) which seals thestem (200) is tightened by the studs (902.2) and nuts (920.2)on the gland flange (452). The bonnet (166) is equipped withan integral, hard faced back seat, which seals the valve whilestem is in upmost position.Flow seal area : The seat rings (515) are seal welded into thebody (100). The wedge unit consists of two hard faced discs(350) which can pivot on the disc holder (367). The discs aresupported by replaceable thrust inserts held by a pin. The discsare secured from turning by a retaining element at the bottomof the stem (200). The double disc wedge unit is screwed onthe stem (200) and guided by lateral rails in the body (100).Bonnet seal area : The valve is equipped with a pressure sealbonnet. The bonnet (166) is pressed against the gasket (411) bythe pressure in the valve body (100). The gasket is supportedby the spacer ring (500) and the segmental thrust ring (501)which is seated in a groove of the body (100). The gasket isprecompressed between disc thrust plate and bonnet (166) bymeans of the studs (902.1) and nuts (920.1).GTC 900-2500 GTC 150-60044.3.3 Gate valves (Class 150, 300, 600)The valve consists mainly of body (100), bonnet (166) as wellas wedge (361) and stem (200) and the actuating unit.Stem seal area : The gland packing (461) which seals thestem (200) is tightened by gland bolts (900) and nuts (920.2)on the gland flange (452). The bonnet (166) is equipped witha back seat bushing (450) which seals the valve while stem isin upmost position.Flow seal area : The hard faced seat rings (515) are weldedinto the body (100). The seal faces of the flexible wedge (361)are hard faced. The wedge (361) is connected to the stem(200) by a “T” joint. The wedge is guided by lateral rails in thebody (100).Bonnet seal area : Body (100) and bonnet (166) are connectedto each other by studs (902) and nuts (920.1). Tightness isassured by means of the gasket

Approx. Rs 300 / PeiceGet Latest Price

Product Details:

A check valve, or non-return valve, prevents reverse flow by ensuring that fluid can only flow in one direction along a pipeline. It can be installed, for example, in the discharge lines of pumps operating in parallel (see Parallel operation) (where at least one pump is not running) to prevent both reverse flow of fluid handled and the resulting turbine mode operation (see Reverse runaway speed).

While check valves can basically be used in any installation position, gravity-dependent designs need to be installed taking into account the effect of gravity.

Examples of check valves are lift check valves, swing check valves and diaphragm check valves (see also Valve).

Swing check valves are mainly used for medium and large nominal diameters while lift check valves are often installed in smaller diameter pipes

Approx. Rs 100 / PieceGet Latest Price

Product Details:

We hold the expertise to offer a range of KSB Forged Valves, which is procured from KSB. These products are manufactured strictly in compliance with the the international quality standards at our vendors' end. Moreover, we make sure to offer these products in various specifications to cater to the varied needs of power stations and processing engineering & general industries, among others.

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

KSB Pressure Seal Globe Valve to ASME B 16.34, pressure seal bonnet design, butt weld ends, tapered seat, integral satellite back seat, outside screw and yoke, head with ISO flange for actuator fitting, non-rotating stem. And Y-pattern body design. Suitable for use in power stations, general industry, process engineering, for water, steam, gas, oil and other non-aggressive media.

Specifications:

Size DN mm 50 to 200

Pressure P bar up to 439

Temperature tº C up to 593

KSB Pressure Seal Globe Valve

KSB Pressure Seal Globe Valve

KSB Pressure Seal Globe Valve

KSB Pressure Seal Globe Valve

KSB Pressure Seal Globe Valve

Approx. Rs 800 / PieceGet Latest Price

Product Details:

We are instrumental in offering a wide array of Cast Gate Valves to the clients. Our vendors manufacture these products using high quality raw material and advanced machines. Further, our vendors manufacture these products in accordance with the global quality standards. We offer these products in different specifications to our valuable clients, who are located across the country.

 

Features:

• 
  Bolted bonnet
• Butt weld or flanged ends
• Flexible wedge
• Out-side screw, yoke and non-rotating stem

Applications:

• Refineries
• Power stations
• General industry
• Process engineering for water, steam, gas, oil and other non-aggressive media

Approx. Rs 1,200 / PieceGet Latest Price

Product Details:

Globe valves are mainly used as shut-off and control valves. They are classified into subgroups according to their body type (straight-way pattern, angle pattern, conventional or Y-valve design ), the type of seat/disc interface (soft-seated and metal-seated) and the type of stem passage (e. g. bellows, gland packing, elastomers).

Valve design is governed by various factors. Maintenance-free valves with a low resistance coefficient and low space requirements (compact valves) are suitable for use in building services (e. g. heating, air conditioning, water supply, drinking water, cooling circuits). A commercial design variant is a flanged end soft-seated valve with slanted seat design.

Approx. Rs 900 / PieceGet Latest Price

Product Details:

We are involved in providing a comprehensive array of KSB Forged Check Valve to the patrons. These products are manufactured using premium grade raw material and hi-tech machines at vendor’s end. The products offered by us are available in different specifications in the countrywide market. Our products are used in process engineering for gas, water, steam and other non-aggressive media. Further, these products are demanded in power stations and general industry.

Approx. Rs 1,800 / PieceGet Latest Price

Product Details:

KSB Pressure Seal Check ValvePressure Seal Check Valve, pressure seal bonnet design, butt weld ends, swing disc arrangement with inside hinge pin and non-turning disc.